|
|
|
|
 |
| Model |
KOS-651SC |
Certificate |
 |
 |
| X-Length |
240 mm |
CE |
R |
|
 |
| Product catalogue |
dwg |
 |
 |
|
| ① |
Belt width |
3 |
25mm |
| 6 |
65mm |
| 10 |
100mm |
| 20 |
200mm |
| Tube diameter(Ø) |
T6 |
Ø6 |
| ② |
Belt length
(standard) |
|
25mm |
65mm |
| 0 |
263mm |
313mm |
| 5 |
357mm |
448mm |
| 6 |
568mm |
553mm |
| 7 |
683mm |
668mm |
Belt length
(large) |
| |
100mm |
200mm |
| 1 |
313mm |
| 3 |
370mm |
| 5 |
437mm |
Tube length |
| 130 |
130mm |
| 160 |
160mm |
| 200 |
200mm |
| ③ |
OIL Drain Direction |
0 |
A |
| 1 |
B |
| 2 |
C |
| ④ |
Belt & Tube |
None |
viton tube |
| S |
Urethane belt |
| M |
Stainless belt
(Possible only 350mm, 600mm)
For Washers (temperature of 70°C) |
| ⑤ | Belt & Motor | None |
Plastic motor cover |
| C |
Belt cover |
| B |
Motor terminal box |
| CB |
Belt cover + Motor terminal box |
| PT |
Plastic TUB cover |
| WT |
Steel TUB cover |
| ⑥ |
Cable length |
1 |
1m |
| 2 |
2m |
| 3 |
3m |
| 4 |
4m |
| 5 |
5m |
| ⑦ |
Available
voltage |
1 |
Single phase AC 110V |
| 2 |
Single phase AC 220V |
| ⑧ |
Connect type |
A |
Plug (110V) |
| B |
Plug (220V) |
| C |
3pin Plug |
| D |
Connect |
| E |
Elbow Connect |
* Product using temperature : 20~30℃
* Long-term use in high temperature,
the belt and the tube can be deformed.
*  for tube oil skimmer
* M-Stainless belt is applicable for
KOS-350□C, KOS-600□C only.
OIL SKIMMER is usually used to remove the floating non-
equeous oil. it is applied extensively to lubricating oil, motor oil,
machine oil, machine operating oil and the other liquid oils.
Using corrosion resisting and crash-worthy belt,
it can remove the oil continuously regardless of changes of the liquid level.
Floating oils in the coolant, Heat treatment equopments,
and Coating plants, Grinders, Machining centers, CNC lathes, etc.
|
301SC SERIES
| Model |
KOS-351SC |
KOS-361SC |
KOS-371SC |
| X - Length |
175 |
394 |
500 |
| □ - Material for belt |
Urethane
|
| Oil removal volume |
2.5ℓ/h
|
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
601SC SERIES
| Model |
KOS-601SC |
KOS-651SC |
KOS-661SC |
KOS-671SC |
| X - Length |
117 |
242 |
355 |
469 |
| □ - Material for belt |
Urethane
|
| Oil removal volume |
5ℓ/h
|
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
301MC SERIES
| Model |
KOS-351MC |
| X - Length |
177 |
| □ - Material for belt |
Stainless |
| Oil removal volume |
2.5ℓ/h |
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
601MC SERIES
| Model |
KOS-601MC |
| X - Length |
117 |
| □ - Material for belt |
Stainless |
| Oil removal volume |
4ℓ/h |
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
KOS-352SCJ SERIES
| Model |
KOS-352SCJ1 |
KOS-352SCJ2 |
| X - Length |
217.5 |
197.5 |
| □ - Material for belt |
Urethane
|
| Oil removal volume |
2.5ℓ/h
|
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
1052SC SERIES
| Model |
KOS-1012SC |
KOS-1032SC |
KOS-1052SC |
KOS-1002SC |
| X - Length |
111 |
168 |
235 |
265 |
| □ - Material for belt |
Urethane
|
| Oil removal volume |
13.6ℓ/h
|
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
2052SC SERIES
| Model |
KOS-2012SC |
KOS-2032SC |
KOS-2052SC |
| X - Length |
111 |
168 |
235 |
| □ - Material for belt |
Urethane
|
| Oil removal volume |
21.3ℓ/h
|
| Power |
1 Phase, AC(110V, 220V), 60Hz
|
■ Specifications and standards are subject to change without prior notice.
■ The special model could be made by your order.
|
●How to change belts - While pressing the pully(C) in the direction of the arrow and remove the belt from pully(A).
- After change the new belt, please assemble the cover.
●How to change motor - While pressing the pully(C) in the direction of the arrow and remove the belt from pully(A)
- Unscrewing the bolts(B) 2EA and remove the funnel.
- Unscrewing the wrench bolts(M5)(F) and remove pully(A) use 5mm hex head wrench.
- Unscrewing the sus bolts(D) 4EA and remove motor case.
- Unscrewing the black color coated bolts(E) 4EA and remove the motor use screw driver and 8mm spanner.
- Please disconnect the power line and ground wire are connected to the motor.
- After change the new motor, please assemble in reverse order.
Belt type oil skimmer - How to change parts
●How to change tube
- Unscrewing the [+]bolt(A) 4ea and remove cover.
- Unscrewing the [+]bolt(B) 4ea and remove cover.
- While pressing the pully(C) in the direction of the arrow( ) and remove the tube from pully(A)
- After change the new tube, please assemble the cover.
●How to change motor
- Unscrewing the [+]bolt(A) 4ea and remove cover.
- Unscrewing the [+]bolt(B) 4ea and remove cover.
- While pressing the pully(C) in the direction of the arrow( ) and remove the belt from pully(A)
- take apart the pulley(D) by using wrench bolt(M4) hexagon wrench
- Unscrewing the [+]bolts(E) 4EA and remove the motor use screw driver and 8mm spanner.
- Please disconnect the power line and ground wire are connected to the motor.
- After change the new motor, please assemble the cover.
Warning
- In order to prevent receiving electric shock and malfunctioning of the machine, do not supply power until all the wiring is completed and ended.
- In any case, do not disassemble, process, reform, and repair this product. it might cause malfunctioning,electric shock or fire.
- To separate the product, turn off the power supply first. It might cause electric shock, malfunctioning or breakdown.
- To prevent breakage and malfunctioning of this product, appropriate power voltage should be supplied.
Attention
- Make sure whether it is identical with the specification you have ordered.
- Do not use it in a place, where corrosive gas (especially, harmful gas, ammonia, etc.) and inflammable gases are generated.
- In case of contacting water, make sure it is thoroughly inspected before use in order to prevent leakage of electricity or fire.
- Do not turn the belt(or the tube) of this product by force.
- When changing the belt(or the tube) of this product, do not turn the shaft of a motor by force.
- Avoid shocks such as dropping the product.
- To improve the quality of the product, its colors and parts of design are subject to changes without a prior notice.
|
|
|
|
|
> Products > View all products
